Fully isolated True RMS Triple Element Current Transducer

Introduction

Our Eclipse series of current transducers convert an AC
current into a standard DC signal. The current may be
directly connected (up to 10A), or via a current
transformer (1A/5A/10A Secondaries) Our average sensing transducers are
RMS calibrated for use with sine waves of less than 1%
distortion. The RMS sensing transducers measure the True RMS
current. Our self-powered current transducers obtain their power from
the AC line being monitored and provides a range of zerobased
current or voltage outputs. The auxiliary-powered transducers have
been designed so that outputs of 4-20mA or 0-10V may
be obtained.

• Isolation 2kV to IEC414
• Mounting - DIN rail
• Enclosure - 100mm
• High Accuracy Current Transducer
  
• Conforms to EMC Directive 89/336/EEC amended by 93/68/EEC
  and Low Voltage Directive 72/23/EEC
• Ideal in chopped wave and phase angle firing control systems
• Capable of handling badly distorted waveforms and harmonics
• All three Current Transducers use a common auxiliary power supply voltage output that has been selected to enable it to be used with either a single entry or differential input PLC
• Output Types 0-1V, 0-5V, 0-10V
  
• Wiring - Fixed terminals 

For more information on this Current Transducer please download the data sheet